engatech

» Closer-than-ever simulation of end 3D model products

Simultaneously prints parts with different mechanical properties, opening the way to cutting down on development time and cost, throughout the design cycle.  Enables close emulation of the look, feel and function of final products, facilitating selection of the end-product materials. Enables printed prototypes that are very close to the end part in terms of mechanical properties and material combinations, e.g. over-molding and double injection. Saves days of simulating and preparing complex and expensive molds for double injection. Eliminates the need for silicon molds used for testing by enabling most of the testing to be done on an early stage, prototypes printed overnight.

Saves costs and time on applications that would usually involve gluing separate parts made of different materials, or gluing several small pieces to make a large part. Improves communication between different groups and decision makers in the company, such as R&D, internal/external customers, engineering, marketing, sales, and management.

» The Connex™ 3D Printing System allows a wide choice of materials

Creates a wide variety of Digital Materials™ -- Composite materials made up of two FullCure model materials integrated in specific concentrations and structures to provide the desired mechanical properties. Uses Objet’s FullCure® photopolymer model and support materials, offering a wide variety of mechanical and physical properties, and easy support removal.

» The Connex™ 3D Printing System offers a variety of build process and printing modes

• Multi Material Parts – Parts printed using multiple FullCure model materials; eliminates the need to design, print and glue together separate model parts to make a complete model, leading to dramatic savings in printing and post-processing time.
• Digital Materials – Composite materials made up of any two FullCure model materials integrated in specific concentrations and structures to provide the desired mechanical properties; enables close simulation of the target product materials for early-stage testing.
• Mixed Tray – Different parts made with different materials in a single build; saves time on materials replacement and provides an answer for multiple users
• Easy switching between three printing modes – provides a versatile answer for a virtually unlimited variety of applications:
  • Digital Material (DM) printing mode operates at 12 mm per hour in 30 micron-layers, providing the ability to print parts made of multiple model materials, including Digital Materials.
  • High Quality (HQ) printing mode builds single-material parts at 12 mm per hour in 16-micron (0.0006 inch) layers.
  • High Speed (HS) printing mode, for single-material parts, runs at 20 mm per hour in 30 micron (0.001 inch)-layers
• User-defined selection of exact materials, printing speed and resolution needed for individual parts

» The Connex™ 3D Printer offers outstanding quality, accuracy

Highest resolution, with identical X & Y resolution of 600 DPI Thin walls down to 0.6mm (0.024”) Horizontal layers of 16µ (0.0006”) Ultra-fine details in all dimensions Highly precise printing – maximum tolerance of 0.3mm over large models Exceptionally fine details and an outstanding smooth surface finish

» The Connex™ 3D Printing System enables Clean, smooth surfaces

• Easy-to-remove support material enables complex geometries.
• Creates smooth exterior and interior surfaces, including cavities, without the remnants characteristic of rigid support structures.
• Eliminates finishing and post-build processing.